| |
| Tough Enough™ Clear Top Coat |
| |
| What it is: |
| Tough Enough is simply VIVILON™ with a unique high molecular weight resin added to provide enhanced color and gloss retention, extreme flexibility and enhanced adhesion over hard to adhere to nonporous substrates.
Tough Enough provides excellent graffiti protection as well.
This resin also brings excellent diesel, kerosene and gasoline resistance properties to the coating. In all other respects, such as restoring faded paint, fiberglass gelcoat, metals and aluminum or vinyl siding, Tough Enough performs like regular VIVILON™. |
| |
| Where is it used: |
To restore and protect c lear-clad, anodized or galvanized aluminum, stainless steel, fiberglass, brass, copper and chrome;
Or, on ANY surface where graffiti resistance is desired;
Or, anywhere absolute maximum adhesion over hard to adhere to surfaces is needed;
Or, on any surface subjected to high flexural stress where optimum flexibility of the coating film is required.
How Can I Buy It
VIVILON makes it simple, quick and easy to purchase our products. By clicking the BUY NOW button below, you will be taken to our PayPal Secure Payment Shopping Center where you will be able to buy whatever you want, using whatever means of payment you want. Credit Cards (Visa, Mastercard, American Express or Discover), Debit Cards, E-Checks or PayPal. Your order will be packed and shipped the next day at no extra charge. That's right, the shipping cost is paid by VIVILON!
IMPORTANT: All information used to process your order is secure with PayPal and we never see it. Of course, during business hours, you can always call us to check on your order or have any question answered. If you are ready to begin shopping, click on the button below. Thank You!
One Gallon
|
Two Gallons
|
Five Gallons
|
|
| |
PRODUCT DATA SHEET |
| |
| Solids Content: 22% |
| |
| Weight Per Gallon: 7.6 Pounds |
| |
| Coverage Rate: 1000-1050 Square Feet Per Gallon (SFPG) |
| |
| Time to Touch Dry: 4-7 Minutes At 70 Degrees F; 50% Relative Humidity |
| |
| Time To Full Cure: 5 Days |
| |
| Dry Time Between Coats: 1 Hour (At 70 Degrees F; 50% Relative Humidity) |
| |
| Recommended Wet Film Thickness (WFT) Per Coat: 1.5 Mils Or 38 Microns |
| |
| Approximate Dry Film Thickness (DFT) Per Coat: .33 Mil or 8 Microns |
| |
| Theoretical Coverage @ .33 mil (DFT) Per Coat: 1050 Square Feet |
| |
| Typical 60 Degree Gloss: 90 |
| |
| Viscosity Using #2 Zahn Cup: 30 Seconds |
| |
| Application Methods: |
| Conventional or HVLP compressed air, HVLP turbine sprayer, airless, electrostatic, air assisted airless sprayers, brush, short nap roller, sponge or squeegee/spreader. |
| |
| Recommended Spray Gun Setups: |
- Siphon Feed: 2.0 mm to 2.4 mm (.0787 to .0866)
- Gravity Feed: 1.4 mm to 1.6 mm (.0551 to .0630)
- Pressure Feed: .8 mm to 1.0 mm (.0315 to .0394)
|
| |
| Sanding & Buffing: |
| While NOT necessary, Tough Enough™ can be easily sanded or buffed after 8 hours If desired. Buff with 1000, 1200, 1500 or 2000 compound or cleaner/glaze and a rotary or DA buffer. |
| |
| Equipment Cleanup: |
| Toluene, Xylene or Lacquer Thinner |
| |
| For Faster Dry Time: |
| Add from 1 to 3 ounces of Xylene per quart of Tough Enough. Recommended whenever spraying below 50 degrees Fahrenheit. |
| |
| To Slow Dry Time: |
| Add 1 to 3 ounces of VIVILON Retarder per quart of Tough Enough. Recommended when spraying above 85 degrees Fahrenheit or to extend open time when brushing or rolling product. |
| |
| To Prevent Blushing on Humid Days: |
| Add 1 to 3 ounces of VIVILON Retarder per quart of Tough Enough. |
| |
| Maintenance Cleaning: |
| Wash surface after full cure with a neutral cleaner and a soft brush. DO NOT USE hot water, steam, highly acidic or caustic materials. They are not needed or advised. |
| |
| |
| IMPORTANT: |
| The Material Safety Data Sheet (MSDS) and the container labels for these products contain additional important health and safety information, which you should read carefully and follow before using this product. |
| |
| |
| Beauty and Protection Perfection |
