| |
| VIVILON Tag...You're Out ™ |
| |
| What it is: |
| Tag...You're Out! is a waterborne urethane polymer blend which dries to a clear, flexible, high gloss protective coating with excellent UV, chemical, solvent and abrasion resistance. It restores the color and gloss to faded surfaces on almost any substrate including, bot not limited to, painted and clad metals, fiberglass, brick, stucco, EIFS
and stained or painted wood. |
| |
| Where is it used: |
| Graffiti resistance is the primary objective of Tag...You're Out! When a protected surface is "tagged" with any type of marking, the graffiti can be easily removed without effecting the protective coating.
Simply wipe or spray on our special cleaner (ERASER) and easily wipe away the graffiti without damage of any kind to the coating. Unlike "sacrificial" coatings which need to be replaced after each "use", Tag...You're Out! keeps on protecting for years of unblemished beauty.
How Can I Buy It
VIVILON makes it simple, quick and easy to purchase our products. By clicking the BUY NOW button below, you will be taken to our PayPal Secure Payment Shopping Center where you will be able to buy whatever you want, using whatever means of payment you want. Credit Cards (Visa, Mastercard, American Express or Discover), Debit Cards, E-Checks or PayPal. Your order will be packed and shipped the next day at no extra charge. That's right, the shipping cost is paid by VIVILON!
IMPORTANT: All information used to process your order is secure with PayPal and we never see it. Of course, during business hours, you can always call us to check on your order or have any question answered. If you are ready to begin shopping, click on the button below. Thank You!
One Gallon
|
Two Gallons
|
Five Gallons
|
|
| |
PRODUCT DATA SHEET |
| |
| Solids Content: 40% |
| |
| Weight Per Gallon: 8.9 Pounds |
| |
| Elongation: 200% |
| |
| Tensile Strength: 7,825 P.S.I. |
| |
| Coverage Rate: 900-1000 Square Feet Per Gallon (SFPG) |
| |
| Time to Touch Dry: 10-15 Minutes At 70 Degrees F; 50% Relative Humidity |
| |
| Time To Full Cure: 5 Days |
| |
| Dry Time Between Coats: 2 Hours ( At 70 Degrees F; 50% Relative Humidity ) |
| |
| Recommended Wet Film Thickness (WFT) Per Coat: 1.6 Mils or 41 Microns |
| |
| Approximate Dry Film Thickness (DFT) Per Coat: .65 Mils or 16 Microns |
| |
| Theoretical Coverage @ .65 mil (DFT) Per Coat: 995 Square Feet |
| |
| Typical 60 Degree Gloss: 90 |
| |
| Viscosity Using #2 Zahn Cup: 28 Seconds |
| |
| Application Methods: |
| Conventional or HVLP compressed air, airless, HVLP turbine, air assisted airless, brush, or short nap roller. |
| |
| Recommended Spray Gun Setups: |
- Siphon Feed: 2.0 mm to 2.4 mm (.0787 to .0866)
- Gravity Feed: 1.4 mm to 1.6 mm (.0551 to .0630)
- Pressure Feed: .8 mm to 1.0mm (.0315 to .0394)
|
| |
| Sanding & Buffing: |
| While NOT necessary, Tag...You're Out! can be easily aanded or buffed after 8 hours IF desired. Buff with 1000, 1200, 1500 or 2000 compound or cleaner/glaze using either a DA or rotary buffer. |
| |
| Equipment Cleanup: |
| Soap and water |
| |
| Thinning Solvent : |
| Water. |
| |
| Maintenance Cleaning: |
| To wash Tag...You're Out! coated surfaces after full cure, use a neutral cleaner and a soft brush or roller sponge. DO NOT USE hot water or steam cleaners as they are not needed or advised. A dilute solution of pool chlorine may be used if necessary to remove light mold, mildew or algae growth. |
| |
| NOTICE: PROTECT FROM FREEZING |
| While Tag...You're Out! has been formulated to pass a 5 Cycle Freeze-Thaw test, it IS a waterborne coating. Therefore, DO NOT allow exposure to temperatures below 40 degrees Fahrenheit. Store containers on pallets or shelves. |
| |
| IMPORTANT: |
| The Material Safety Data Sheet (MSDS) and the container labels for these products contain additional important health and safety information, which you should read carefully and follow before using this product. |
| |
| |
| Beauty and Protection Perfection |
